fiberlasersapare

  Inside the Fiber Laser Nozzle Cutting Machine, It is worth noting that during the cutting process; it is imperative to maintain a constant distance between the workpiece and the nozzle to prevent splash back during the cutting process. The diameter of the nozzle determines the size of the gas flow entering the furnace, the gas diffusion area and the gas flow rate, which affects the stability of melt removal and cutting. The gas flow in the kiln is large, the speed is fast, the position of the workpiece in the gas flow is suitable, and the ability to spray the melt is high. Therefore, the larger the selected nozzle aperture, the worse the protection of the focusing lens, because when the molten splatter spark occurs, the probability of a bomb is very high, thereby shortening the life of the lens. When the nozzle is deformed or the nozzle melts, its effect on the cutting quality is the same as above. Therefore, the laser nozzle must be carefully placed and not damaged to avoid de

  Fiber laser spares refers to the ceramic ring insulator for the cutting head of any laser cutting machine. Our ceramics are not original, although they are made following the highest quality standards. For this reason they have similar duration and functionality, but with the advantage of being of a useful value. The fiber laser ceramic ring is used to transmit the electrical signals collected by the nozzle of the laser head, to protect the cutting head above the ceramic body from being damaged when the cutting nozzle collides and is critical to the normal and stable operation of the laser. Plays a role Cutting machine Features Material: Made of high quality machined wsx laser ceramic and special alloys, which can ensure the stability of thermal expansion of each material of the ceramic body and prevent bursting. Processing: they closely adhered The raytool laser ceramic body and the alloy to each other with German technology, firmly aligned with welding, they do not deform

We can apply these original laser nozzle to our RayTools laser heads. Nozzles come in many shapes and sizes so check that the size of your nozzle matches the size below. Under normal circumstances it becomes necessary to replace the laser tips/nozzles every 90 -130 hours. They mainly used a single nozzle for cutting with nitrogen or argon. The nozzle is a commonly used universal nozzle for cutting metal sheet materials from 1.2 to 2.5 mm thickness.   Fiber Laser Nozzle Laser Tip Cutting Head RayTool Replacement fiber laser nozzle / wear part for RayTools fiber laser cutting head. They used single nozzle for cutting metals using nitrogen or argon and the quality of the laser notch and the life of your machine depend heavily on the quality of your nozzle. Use only original quality nozzles. In the market, you can buy many cheap, poor quality laser tips. Contact us for more information.   Nitrogen -> Single Nozzle | Oxygen -> Double Nozzle | Thicker Plate = Larger Opening

  Fiber laser ceramic is a material that is required to be highly resistant to wear or temperature changes, especially in industrial applications. If the substrate becomes more sensitive to mechanical impact when the hardness is increased, there is a loss of quality. For this reason, it becomes essential to use WSX laser ceramic to avoid microscopic cracks during the marking process. Ceramic holders of raytool materials are used for electronic components, for example, they commonly used semiconductor boards for medical implants and tableware or sanitary items and the parts are often varnished or coated. Fiber lasers can take advantage of using ceramic and it is non-contact, the material is flexible in fabrication and results in very fine and sharp contour marks. Laser parameters are selected individually, depending on the special characteristics of the material. For color effects, it becomes possible to additionally laser mark the engraved areas. Fiber laser is a suitable marking s